Your cart is currently empty!
Categories: Sterisil
-
AC+ Cartridge Replacement Kits
Annual Kit – Stages 1, 2 & 3 + Class B UV Bulb for the Sterisil AC+ Autoclave Water System
Stages 1, 2, 3, and the UV Light’s lifespan are chronological and are replaced annually from the date of installation. Their lifespan is tracked via the Filter Monitor on the far left side of the system. When properly programmed, the Filter Monitor tracks the remaining months of the cartridges and UV Light life.
*Dispose of cartridges into regular trash.
-
Sterisil AC+ Autoclave Water Plus System
Sterisil® Ac+ System produces autoclave water for areas with water containing <500 PPM TDS. Sink top dispensing faucet or filler wand for easy filling of table top autoclaves. The AC+ connects directly to your municipal water supply and produces up to 50 gallons per day of distilled quality water for your instrument washers, autoclaves, and dental bottles.
-
Collection Container with Recycle Kit
- Return shipping and recycling included
- Collection container must be replaced when solids reach the full line or every 12 months, whichever occurs first.
- Enroll in the Solmetex Subscription Service for auto-delivery of collection containers.
- Manage and download recycling certificates 24/7 in My Solutions Center.
-
Autoclavable Mouthpiece
DryShield mouthpieces are made of a soft, flexible silicone material designed to fit comfortably in the patient’s mouth.
- Autoclavable
- Interchangeable bite block
- Tongue and oral pathway shield
- Airway protection
- Cheek retractor
-
Single-Use Mouthpiece
DryShield mouthpieces are made of a soft, flexible material designed to fit comfortably in the patient’s mouth. Each mouthpiece incorporates a tongue and oral pathway shield, airway protection, and cheek retractor.
- Single-Use / disposable
- Cannot be sterilized
-
PowerSonic Ultrasonic Cleaning Solution
PowerSonic Ultrasonic Cleaning Solution is a patented, plant and mineral based, 100% enzyme free, catalytic cleaner that super charges the action of your ultrasonic bath and instrument washer using nano-oxygen bubbles.
- Effectively removes debris.
- Rapidly removes protein — even without ultrasonic action.
- Reduces ultrasonic bath sludge and odor.
- Breaks down organic waste to essentially “eat up” any remaining contaminants.
-
PowerScrub Vacuum Line Cleaner
- Meets all EPA “Dental Rule” requirements – Neutral pH level between 6 and 8.
- Contains Mereduce™, which is scientifically proven to inhibit the release of harmful mercury.
- Compatible with all dental evacuation systems and all amalgam separators.
- Microbial formulation optimizes collection container capacity.
-
Practice Waste Solutions Biohazard/Sharps Container
- For Recycling of sharps containers, towels, gloves, sponges, bibs, articles of clothing, bandages and gauze.
- Containers have proper labeling and shipping documents to transport waste for recycling.
-
Practice Waste Solutions Lead Bucket
DOT/EPA approved storage/shipping containers.
For the Recycling of:
- Lead waste & lead foil
- Bitewing x-ray
- Sterilization tape
-
Practice Waste Solutions Amalgam Bucket
Meets all requirements of the EPA “Dental Rule”. DOT/EPA approved storage/shipping containers.
For the Recycling of:
- Chair-side traps
- Vacuum Filters
- Teeth with Amalgam
- Spent Amalgam Capsules
- Contact & Non-Contact Amalgam
-
NXT Hg5 Amalgam Separator
Featuring a compact design for easy and flexible installation, the Solmetex® NXT Hg5 Amalgam Separator is certified to remove more than 99% of solids from the waste stream of a dental vacuum system. An economical and virtually maintenance-free turnkey solution to EPA compliance.
- Device designed to capture amalgam & other heavy metals from dental office wastewater
- Required by EPA for use in all dental offices
- Accommodates up to 4 (Mini), 10 (Standard), or 20 (High Volume) operatories
Questions? Please contact Solmetex Customer Service or your Dental Dealer.
-
-
-
DryShield O-Ring (Pack Of 5)
Replacement o-ring for smooth function of the DS1 levers.
-
DryShield Grommet
Optional grommet to fit DS1 onto non-standard tool bars.
